网站地图    收藏   

主页 > 系统 > linux系统 >

keepalived配置 - Linux操作系统:Ubuntu_Centos_Debian -

来源:自学PHP网    时间:2015-04-14 11:12 作者: 阅读:

[导读] keepalived配置之前已经安装完成,接下来我们配置keepalived。假设我的ip地址如下:server1:192.168.0.150server2:192.168.0.157vip:192.168.0.50在两台服务器上分别执行如下命令:[@server_150 keepalived]# ......

keepalived配置
 
之前已经安装完成,接下来我们配置keepalived。
假设我的ip地址如下:
server1:192.168.0.150
server2:192.168.0.157
vip:192.168.0.50
在两台服务器上分别执行如下命令:
[@server_150 keepalived]# mkdir /etc/keepalived
[@server_150 keepalived]# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
[@server_150 keepalived]# cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
[@server_150 keepalived]# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
对应操作的含义:
mkdir /etc/keepalived  ##为keepalived创建配置文件目录,默认配置文件从/etc/keepalived下读取 
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/ ##复制keepalived的二进制命令  
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/  ##提供启动脚本 
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/ ##keepalived的主配置文件
编辑/etc/keepalived/keepalived.conf文件,主机修改内容如下:
! Configuration File for keepalived
 
global_defs {
   notification_email {
     test@localhost.com
   }
   notification_email_from localhost@localhost.com
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL
}
 
 
vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.0.50
    }
}
 
从配置如下:
! Configuration File for keepalived
 
 
global_defs {
   notification_email {
     test@localhost.com
   }
   notification_email_from localhost@localhost.com
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL
}
 
 
vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 80
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.0.50
    }
}
启动主从的keepalived:
在主从上分布执行:
[@server_150 ~]# keepalived start
[@server_150 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 78:2b:cb:66:44:2a brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.150/24 brd 10.10.79.255 scope global eth0
    inet 192.168.0.50/32 scope global eth0
    inet6 fe80::7a2b:cbff:fe66:442a/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 78:2b:cb:66:44:2c brd ff:ff:ff:ff:ff:ff
    inet 220.181.26.82/24 brd 220.181.26.255 scope global eth1
    inet6 fe80::7a2b:cbff:fe66:442c/64 scope link 
       valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 78:2b:cb:66:44:2e brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 78:2b:cb:66:44:30 brd ff:ff:ff:ff:ff:ff
6: sit0: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
从机:
[@server_157 ~]# keepalived start
[@server_157 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 78:2b:cb:65:7f:9f brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.157/24 brd 10.10.79.255 scope global eth0
    inet6 fe80::7a2b:cbff:fe65:7f9f/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 78:2b:cb:65:7f:a1 brd ff:ff:ff:ff:ff:ff
    inet 220.181.26.92/24 brd 220.181.26.255 scope global eth1
    inet6 fe80::7a2b:cbff:fe65:7fa1/64 scope link 
       valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 78:2b:cb:65:7f:a3 brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 78:2b:cb:65:7f:a5 brd ff:ff:ff:ff:ff:ff
6: sit0: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
现在停止从机的keepalived服务,再次查看主从ip addr,与上面的结果一样。
启动从机的keepalived服务,然后停止主机的keepalived服务。
再次查看主从的ip addr
主机:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 78:2b:cb:66:44:2a brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.150/24 brd 10.10.79.255 scope global eth0
    inet6 fe80::7a2b:cbff:fe66:442a/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 78:2b:cb:66:44:2c brd ff:ff:ff:ff:ff:ff
    inet 220.181.26.82/24 brd 220.181.26.255 scope global eth1
    inet6 fe80::7a2b:cbff:fe66:442c/64 scope link 
       valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 78:2b:cb:66:44:2e brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 78:2b:cb:66:44:30 brd ff:ff:ff:ff:ff:ff
6: sit0: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
从机:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 78:2b:cb:65:7f:9f brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.157/24 brd 10.10.79.255 scope global eth0
    inet 192.168.0.50/32 scope global eth0
    inet6 fe80::7a2b:cbff:fe65:7f9f/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 78:2b:cb:65:7f:a1 brd ff:ff:ff:ff:ff:ff
    inet 220.181.26.92/24 brd 220.181.26.255 scope global eth1
    inet6 fe80::7a2b:cbff:fe65:7fa1/64 scope link 
       valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 78:2b:cb:65:7f:a3 brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 78:2b:cb:65:7f:a5 brd ff:ff:ff:ff:ff:ff
6: sit0: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
发现虚ip已经从主机绑定到从机,配置测试完成。
 

自学PHP网专注网站建设学习,PHP程序学习,平面设计学习,以及操作系统学习

京ICP备14009008号-1@版权所有www.zixuephp.com

网站声明:本站所有视频,教程都由网友上传,站长收集和分享给大家学习使用,如由牵扯版权问题请联系站长邮箱904561283@qq.com

添加评论